Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

       

News items June 2018

Post your news
Arabic feed mill in full swing
Arabic feed mill in full swing
Close to Rihyad (Saudi Arabia) a feed mill is being built that will feed 70.000 cows every day. Jansen&Heuning supplied all elevators, chain conveyors, screw conveyors and paddle mixers. For Jansen&Heuning this is the largest project outside the European Union so far. The factory will be put into operation at the end of this year. On the photo you see the two mixers at the bottom left. On the right the elevators.
28.06.2018  |  2607x  |  Press release  | 
Automatically magnetic separator for powders and granulates removes metal particles (»30 µm) from powders in the food industry
Automatically magnetic separator for powders and granulates
removes metal particles (»30 µm) from powders in the food industry Goudsmit Magnetics introduces an automatically cleanable ‘Easy Clean’ magnetic separator. This is used to remove metal particles (>30 µm) from powders in the food, chemical, ceramic, plastics and other industries. The Easy Cleanflow magnet is notable for its high magnetic flux density of over 12,000 gauss on the bars that come into direct contact with the product, as well as a deeply penetrating magnetic field that effectively makes powders and granulates iron-free at high flow rates. The magnet is dustproof to an overpressure of 1.5 bar and includes a simple controller. The user-friendly cleaning requires 6 bar air and a 24 VDC start signal. The captured ferrous particles land in a collection tray. Higher separation yield The modified design consists of a single row of thick Ø50 mm bars instead of the two layers of thin Ø25 mm bars that were used previously. New measurement techniques, including simulations of magnetic fields and tests, have shown that this
27.06.2018  |  3158x  |  Product news  |   | 
FRITSCH goes AR  Simply place our instruments in your laboratory via AR-App and experience the innovations
FRITSCH goes AR
Simply place our instruments in your laboratory via AR-App and experience the innovations Augmented reality (AR) is a technology that superimposes a computer-generated image on an user’s view of the real world, thus providing a composite view. In soccer broadcasts, for example, you’ll find augmented reality when superimposing distances of free kicks using a circle or a line. We took advantage of this effect and programmed an app for you. For example, our knife mill PULVERISETTE 11 appeals to you, but you do not yet know whether it is the right instrument for your laboratory? No problem! Simply place the instrument in a free space in your laboratory using a mobile device and discover the many functions of the instrument. You can also watch the corresponding product video with valuable information in the app. Have we roused your interest? Just use the enclosed contact form. Try it yourself and download the app directly from the app store of your mobile device:
26.06.2018  |  10461x  |  Press release  | 
Dispersion Analysis and Materials Testing 2018 Conference Report: International Workshop
Dispersion Analysis and Materials Testing 2018
Conference Report: International Workshop Extract from the full report by Dr.-Ing. Hildegard Lyko, free-lanced journalist 1. Introduction This year, the Workshop clearly focussed on particle characterization and stability analysis. With 16 lectures announced, ..., participants had good opportunities to discuss the interesting results from testing materials by means of analytical centrifugation and gravity sedimentation. A large variety of application fields was covered ..., ranging from inorganic particles, bacteria cultures, dairy products, and fruit drinks to technical suspensions containing ceramic or organic particles as well as to emulsions for diverse industrial applications. Besides particle characterization and stability testing, the analytical instruments by LUM play a decisive role in the determination of filterability or in the optimization of production processes. 4. Young Scientist Awards This year three nominees from German universities and one candidate from China had been
26.06.2018  |  5013x  |  Press release  | 
E-finity® low pressure continuous dense phase designed for stability and reliability
E-finity®
low pressure continuous dense phase designed for stability and reliability Schenck Process E-finity® is a patented continuous dense phase conveying system for fragile materials. Precise pressure monitoring and airflow corrections allow the system to operate efficiently under all conditions, while gently inducing materials through the convey line in slug form. E-finity® is ideally suited for granular and pelleted materials, and has proven itself on many projects for pet foods, cereals, nuts, grains, prills, and pelleted material. Unique E-finity® air controls can employ a single air source to operate 2-3 different systems simultaneously. The result is a significant cost savings in both equipment and installation, with continued savings in operation and maintenance moving forward. Our abilities to design, size, sell, fabricate, and integrate other OEM processes as well as installing and providing ongoing support delivers full control. As the primary equipment manufacturer, we manage production schedules for faster lead times on highly-engineered,
25.06.2018  |  11948x  |  Product news  | 
Interview with Hendrik Schreier about Glatt GF ModFlex New modular system concept for continuous spray agglomeration in fluidized beds
Interview with Hendrik Schreier about Glatt GF ModFlex
New modular system concept for continuous spray agglomeration in fluidized beds Hendrik Schreier, Sales Manager Process Technology Food, Feed & Fine Chemicals at Glatt Ingenieurtechnik GmbH explains why Glatt - an expert in continuous fluidized bed technology for almost 30 years - is now presenting GF ModFlex, a new modular system concept for continuous spray agglomeration in fluidized beds for food applications. He points out the advantages of this concept especially for the production of food and presents its innovations with regard to the reduction of energy requirements and operating costs.
22.06.2018  |  11609x  |  Press release  |   | 
IFAT 2018 Presentation Platform for Smart Sorting Solution Promising future prospects for the recycling industry
IFAT 2018 Presentation Platform for Smart Sorting Solution
Promising future prospects for the recycling industry Schönberg, June 2018 For Sesotec GmbH and their partner company KRS Recycling Systems GmbH, two manufacturers of machines and systems for material sorting, the IFAT 2018 was highly successful. Trade visitors to a large extent came from the intended target group and showed great interest in the machines presented at the trade fair, the FLAKE PURIFIER+ multi-sensor sorting system for plastics recycling, and the new SPEKTRUM SCOPE glass sorting system. Sesotec and KRS used the IFAT trade fair to meet many of their customers and to provide information about product innovations, and also in 2018 were able to again welcome many visitors from at home and abroad at the trade fair stand. The further development of the FLAKE PURIFIER+ multi-sensor sorting system as well as the new SPEKTRUM SCOPE glass sorter obviously were well received by customers. Says Michael Perl, head of BU Sorting Recycling at Sesotec, summarizing the IFAT: ”The fact that plastics recyclers showed
22.06.2018  |  10131x  |  Press release  | 
A. Foeth B.V. looks back on a succesful ACHEMA 2018
A. Foeth B.V. looks back on a succesful ACHEMA 2018
ACHEMA 2018 took place in Frankfurt, Germany from the 11th till the 15th of June. ACHEMA is the leading trade fair of the process industry. As the largest dealer of used process equipment in Europe, A. Foeth B.V. had a presence at ACHEMA. A. Foeth looks back on a successful exhibition. ”Our presence at ACHEMA has given us many interesting opportunities and insights.” says Erik Saat, Managing Director of A. Foeth. ”It was a perfect opportunity to speak to our relations and to gain a lot of new relationships. Everyone had some sort of presence at ACHEMA and many of the people you speak are also the people who make the decisions.” At ACHEMA, A. Foeth not only talked to customers, but also had many conversations with process equipment manufacturers. ”A nice side effect of ACHEMA is the ability to strengthen our relationship with the well-known brands in the process industry. As a supplier and reseller of used process equipment, we have a special relationship
20.06.2018  |  3274x  |  Press release  | 
Innovative Matting Agents by means of Glatt APPtec Video of Webinar @ ’Farbe und Lack’ at 14.03.2018 (German)
Innovative Matting Agents by means of Glatt APPtec
Video of Webinar @ ’Farbe und Lack’ at 14.03.2018 (German) Glatt Advanced Pulse Powder Technology to generate custom designed matting agents. Their share in the paint market is only a few percent, but their effect triggers buying impulses and makes the cash registers of vehicle manufacturers and furniture makers ring. Matting agents. Now, thanks to a novel method of spray calcination, test-ready additives for rapid market entry can be ready in just a few weeks.
15.06.2018  |  12324x  |  Product news  |   | 
Presses and Shredders from One Source Channel baling press, document shredders and hard disc shredder
Presses and Shredders from One Source
Channel baling press, document shredders and hard disc shredder Schmitt Recycling in Fulda is based entirely on HSM. The proprietor, Wolfgang Schmitt, values the high performance and reliability of the HSM machines. The modern machine park helps him against major competitors. It is a bit like Asterix: Schmitt Recycling in Fulda is a smaller medium-sized waste disposal business with approximately 35 employees. He is surrounded by two competitors with an international background. The family-run recycling material company must therefore assert itself against strong competition. It achieves this on the one hand with with a strong emphasis on personal contact with the customer and, on the other hand, with an infrastructure, which focuses on performance and efficiency. The proprietor, Wolfgang Schmitt, bases this strategy entirely on HSM. In total, there are now three machines from HSM located on the 15,000 square metre business premises in the Fulda suburb Besges. From the “HSM Powerline HDS 230“ hard disc shredder through the
14.06.2018  |  3008x  |  Product description  |   | 
IR-CLEAN®: FDA Approval for KREYENBORG Infrared Rotary Drum
IR-CLEAN®: FDA Approval for KREYENBORG Infrared Rotary Drum
If Post Consumer Recycling Materials are to be processed directly into PET Sheet, with a process authorized by FDA or by EFSA is an indispensable solution required. With its IR-CLEAN® System, KREYENBORG now offers an attractive and low-cost alternative for Post-Consumer Materials and direct decontamination processing of PET – without any kind of vacuum technology. The system is an advanced development in the process technology of the well-proven IRD Infrared Rotary Drum used in hundreds of industrial applications. The standard process of crystallization and drying of PET Post Consumer Bottle Flakes in the IRD has been refined by various changes in the process parameters and technical modifications – this has resulted in outstandingly good decontamination results which have been proven in tests in collaboration with the Fraunhofer Institute for Process Engineering and Packaging IVV. The Food + Drug Administration FDA has issued a Letter of Non-Objection on the
13.06.2018  |  4647x  |  Press release  | 
Pegasus® Wingdoor Mixer key features for cleaning and accessibility
Pegasus® Wingdoor Mixer
key features for cleaning and accessibility Recently Dinnissen designed, built and delivered several wingdoor mixers for the petfood industry. In this specific industry, blending of kibbles calls for efficient cleaning. Dinnissen therefore invented the Front to Front system for the mixer’s bomb doors several years ago, which makes it possible to completely empty the mixer. Now we also have the option of supplying large wing doors, for easy access. Apart from efficient and effective cleaning due to the improved accessibility, wing doors offer a huge advantage for inspection purposes. The quick-action locks combined with safety interlocks create a safe and ergonomic environment for your operators.
13.06.2018  |  5999x  |  Product news  | 
Complete milling process Engineered and built by Dinnissen
Complete milling process
Engineered and built by Dinnissen Dinnissen Process Technology delivered a complete milling process for a company in the food industry. In this process product is transported, measured, micronized, sieved and checked. The main innovation is the Hamex® Hammermill fitted with a semiautomatic screen changing system. This makes changing the screens much easier and quicker, which increases the production capacity by 20%. Designed, built and tested by Dinnissen in our in-house facilities.
13.06.2018  |  7104x  |  Product news  | 
Glatt GF ModFlex  - newly developed, compact plant design for continuous spray agglomeration of food and feed ingredients
Glatt GF ModFlex - newly developed, compact plant design
for continuous spray agglomeration of food and feed ingredients Based on proven fluidized bed technology Glatt offers a newly developed compact, flexible and modular plant concept for maximum process flexibility, reduced investment costs, low operation costs, minimum space requirements, maximum flexibility, fast installation by plug & play, and safe operation due to hygienic design (EHEDG), high filter performance, integrated WIP, and dust Ex-design (St 1).
12.06.2018  |  13652x  |  Product news  |   | 
AZO LIQUIDS – Solids meets Liquids
AZO LIQUIDS – Solids meets Liquids
The AZO Group, with the three specialist firms AZO SOLIDS, AZO CONTROLS and AZO LIQUIDS, designs and builds complete turnkey plants for fully automated processes with solid and liquid materials. Thanks to its wide-ranging experience of the food, pharmaceuticals, chemicals and plastics industries, the company has acquired very extensive knowledge in the field of raw materials handling. AZO LIQUIDS’ customers in the food, cosmetics and pharmaceuticals industries rely above all on the dependable and reproducible production processes of our plants. Maximum flexibility, efficient use of energy, fully automatic controls and consistent quality features are what set products from AZO LIQUIDS apart. Added to these advantages is our comprehensive industry expertise in all aspects of raw materials handling, from deliveries of raw materials to output and metering, mixing and controlling. AZO covers all areas of production and develops bespoke solutions for its customers. Above
11.06.2018  |  10121x  |  Press release  | 
AZO CONTROLS at the ACHEMA  shows solutions around the production control system Kastor
AZO CONTROLS at the ACHEMA
shows solutions around the production control system Kastor Kastor has been expanded with functions for automated handling of micro quantities using AZO®RoLog New solutions from the Kastor family of products have been developed for AZO®RoLog – new robot-assisted dosing of micro quantities. • Kastor RoWeighControl for controlling robot-assisted weighing • Kastor RoRefill for refilling the dosing receptacle • Kastor RoStore for storage and transport of dosing receptacles and target containers • Kastor RoDataManager for managing job, formulation and receptacle data and settings. These Kastor solutions can either be used as “standalone” models or they can be integrated into a comprehensive Kastor manufacturing execution system. Of course, a solution of this kind is also adapted to customer IT environments (ERP/MES) and provides end-to-end batch tracing. It goes without saying that compatibility with previously implemented solutions using Kastor and ManDos is ensured. AZO®RoLog and the associated Kastor
11.06.2018  |  8595x  |  Press release  | 
Vortex Gravity Vee Diverter Replaces Flapper Diverter
Vortex Gravity Vee Diverter Replaces Flapper Diverter
Vortex’s client previously utilised a flapper diverter to handle baking flour. This was problematic because, depending on the position of the blade, material was constantly flowing through one of the outlets. With the Vortex Gravity Vee Diverter, materials can flow toward either outlet individually, both outlets simultaneously, or both closed for material shut-off. This dual cylinder Gravity Vee Diverter was manufactured from 316 stainless steel. The inlet contains a 610mm round hopper and the outlets are transitioned to match the install footprint. The diverter’s dual cylinder design is intended for use in limited space installations. By side-mounting the actuators, the gate’s overall length is shortened by a third.
08.06.2018  |  12657x  |  Product news  | 
AZO feeding hopper in hygienic design
AZO feeding hopper in hygienic design
The hygienic design feeding hopper serves to feed bulk solids in powdered and granular form into closed materials handling systems, especially in areas calling for the highest standards in hygiene. Products can be fed from sacks, boxes, barrels or similar receptacles. The feeding hopper is available in two different grades of stainless steel and, depending on the surface finish, has surface roughness of < 0.6 µm or < 0.8 µm. The radii on the inside of the feeding hopper are greater than 50 mm and can be cleaned leaving no residue at all. Wet cleaning is done via an integral spray head. The gasket used for the lid can easily be replaced when needed, as it is not attached with adhesive. It is composed of silicone and is metal detectable. The feeding hopper is suitable for use in areas in zones 22 and 2 where there is a risk of explosion. To avoid dust escaping when sacks are discharged, an aspiration process can be connected that starts when the lid of the feeding
08.06.2018  |  9405x  |  Press release  | 
AZO vibration bottom – easy to clean
AZO vibration bottom – easy to clean
For safe discharge of powdery, crystalline, fatty and granular bulk materials from hoppers. Hoppers are discharged completely without leaving residue. Funnel formation and bridging in the hopper are prevented. Can be used for virtually all bulk materials, even those that flow poorly, in the foods, plastics, chemicals and pharmaceuticals industries. Special advantages • Reliable discharge and even fall of the product column (mass flow) • Hygienic design: Smooth internal contours in the silo / hopper without any changes in diameter, smooth surfaces on the exterior, resulting in easy cleaning No inaccessible cavities and exposed screw threads • Elastomer sleeve is easy to assemble and has an accurate fit • The sleeve is silicone-free, conductive and is approved as food-grade, assembly using clamping segments and pressure pieces • Screw locking by means of wedge locking washers • Shock pressure proof to 2 bar (overpressure) and vacuum-proof • Long
08.06.2018  |  11406x  |  Press release  | 
Modular big bag discharge station cost-effective and versatile
Modular big bag discharge station
cost-effective and versatile Flexible bulk materials receptacles such as big bags have become firmly established for handling powders in a variety of branches. They have clear advantages over sacks when it comes to transporting and storing bulk materials. They are environmentally friendly, require less operating staff and storage space and reduce costs for transport and processes. AZO big bag discharge stations make it possible to discharge big bags without generating excess dust and to feed products reliably into the closed production plant. To improve efficiency and reduce costs even further, AZO has developed a modular concept for a big bag discharge station. The required components such as frame, support beams, chain hoist, discharging aids, big bag docking system, buffer bin and discharging unit can be chosen from a “construction set”, depending on the requirements. The entire discharge station can be configured to suit needs without outlay for design, which has a very positive effect
07.06.2018  |  10024x  |  Press release  | 
Druvatherm mixing reactors from Lödige Operating pressures of up to 40 bar and temperatures up to 700°C
Druvatherm mixing reactors from Lödige
Operating pressures of up to 40 bar and temperatures up to 700°C Whether oxidation using oxygen gas or implementation with carbon dioxide or ammoniac: the application-specific requirements for gas-solid reactions are complex and call for correspondingly sophisticated technical capabilities. As a Druvatherm VT 50 mixing reactor demonstrates at Achema, Lödige Process Technology offers a broad product portfolio of tailor-made solutions. Lödige’s product offerings range from “simple” solids mixers to drying systems and pressure vessels for reactions under overpressure. In practice, Lödige has already realized operating pressures of up to 40 bar in the reactor. Reactor sizes range from the small laboratory mixer with a 5-litre drum capacity to production machines with a volume of more than 50,000 litres. This equipment can be used both for batch operation and continuous production lines. In these reactors the solid particles move in a fluidized bed that is mechanically generated in the drum. It is created through the input
07.06.2018  |  9069x  |  Press release  | 
New Sesotec Website Competence communicated comfortably
New Sesotec Website
Competence communicated comfortably For Sesotec, one of the leading manufacturers of machines and systems for contaminant detection and material sorting, the ambition to achieve more customer and market orientation is a main driving force in corporate strategy decisions and in branding. In this context the corporate website is the most important information, communication and interaction instrument, and was therefore created completely anew with respect to design, structure and content. New structure in a new design For the uniformity of content and brand design a new structure was developed that is based on the interests and usage behaviour of customers. ”Attractive pictures should immediately fascinate website visitors, because a user only remains on the website if the first impression really fits”, explains Benjamin Manzenberger, Senior Online Marketing Manager at Sesotec’s corporate headquarters in Schönberg and responsible for the relaunch. On the homepage the visitor can directly reach
07.06.2018  |  10394x  |  Press release  | 
AZO DOSITAINER® and discharge  base for ignition sensitive dusts
AZO DOSITAINER® and discharge
base for ignition sensitive dusts The AZO DOSITAINER® is a container with integrated dosing screw. It is an ideal transport and storage bin for bulk solids at medium throughput. As a mobile storage container that can be automated, it is also used in automatic processing plants. The integrated dosing screw makes it possible to dose accurately into automatic weighing processes. The bulk solids are emptied from the AZO DOSITAINER® by means of a discharge base. This AZO DOSITAINER® and the discharge base are designed to be suitable for dusts with a minimum ignition energy of 1mJ ≤ MIE < 3mJ. Key advantages • The AZO DOSITAINER® and discharge base can be used for extremely ignition sensitive dusts with a minimum ignition energy of 1mJ ≤ MIE < 3mJ • Low-dust, reliable emptying of AZO DOSITAINERS® using patented docking collars, optionally with vibration discharge • The AZO DOSITAINER® can be changed over without intermediate cleaning • Integrated dosing screw with frequency-controlled
07.06.2018  |  11379x  |  Press release  | 
AZO Lump breaker   for crushing of agglomerates in bulk materials
AZO Lump breaker
for crushing of agglomerates in bulk materials The AZO lump breaker is used for crushing and milling of bulk materials with a tendency to form agglomerates, clods and lumps. The sturdy but compact design of the lump breaker, take care for a reliable and gentle crushing of clods and lumps. This unit is designed energy-saving and with low wear. It is available in various construction materials and surface finishings. Due to the pharmaceutical design, it can be dismantled without tools and complies with highest requirements to hygiene and cleaning. The AZO lump breaker consists of a sturdy housing with inlet and outlet flanges, crushing device and a laterally mounted gear motor. By means of an optional extraction device the shaft including screen and the gear motor can be extracted from the housing with low effort. The unit is available with the construction material no. 1.4301 or 1.4404 and various surface finishings including electrolytic polish.
07.06.2018  |  11309x  |  Press release  | 
Feeding systems for continuous processes Brabender Technologie provides reliable, ready-to-use feeding systems
Feeding systems for continuous processes
Brabender Technologie provides reliable, ready-to-use feeding systems Duisburg, May 2018 – adhesives play a key role in many industries. For example, 15 to 18 kilograms of adhesives are used to make just one car. Optimum production of adhesives – a mass product that can have a wide range of different formulas – is crucial to manufacturers being successful. “Producers of large quantities of adhesives are increasingly switching from batch production to continuous production processes, given that the latter may be better in technical and energy terms”, says Michael Weller, Sales Manager at Brabender Technologie. “Brabender Technologie provides complete, application-specific feeding systems, from planning and design through commissioning.” Profound understanding of processes and materials As a specialist in solid and liquid feeding systems for a wide range of different applications, Brabender Technologie has a profound understanding of processes and materials. Liquids, granules and powders need to be dispensed extremely
06.06.2018  |  7674x  |  Press release  | 
Emptying containers with Vibration table series VT How to solve material jams in containers
Emptying containers with Vibration table series VT
How to solve material jams in containers Emptying containers: Vibration table VT with pneumatic linear vibrator of the series NTS in waste incineration plant June 5, 2018 The Zürcher Oberland association (KEZO) is one of the most modern waste incinerator plants in Switzerland. The plant generates electricity and district heating. When conveying the slag, which results from refuse, material jams form in the containers. With the VT vibration table, NetterVibration has found a solution that solves these material jams. Further information on our vibration tables of the series VT can be found at http://www.nettervibration.com/product-category/vibrating-tables/?lang=en. Information on our pneumatic linear vibrators of the series NTS can be found at http://www.nettervibration.com/product-line/pneumatic-linear-vibrators-series-nts/?lang=en.
06.06.2018  |  14315x  |  Product news  |   | 
Innovations at ACHEMA 2018 • Hall 4.1 • Booth J49 FRITSCH • Milling and Sizing!
Innovations at ACHEMA 2018 • Hall 4.1 • Booth J49
FRITSCH • Milling and Sizing! FRITSCH is an internationally respected manufacturer of application-oriented laboratory instruments for sample preparation and particle sizing. This year FRITSCH also got something new to discover. Convince yourself and experience the FRITSCH innovations live during ACHEMA 2018 • Hall 4.1 • Booth J49 FRITSCH innovations in the field of size-reduction NEW: Universal Cutting Mills PULVERISETTE 19 The new FRITSCH Universal Cutting Mills PULVERISETTE 19 are ideal for size-reduction for a wide range of different materials due to variable adjustment of the rotational speed of the rotor, various knife geometries, replaceable blades, practical sieve cassettes and that with an unmatched ease of cleaning. Knife Mill PULVERISETTE 11 The new FRITSCH Knife Mill PULVERISETTE 11 is ideal for very fast and gentle comminution and homogenization of moist, oily, fatty, soft, medium-hard and fibrous samples. Variable Speed Rotor Mill PULVERISETTE 14 premium line
06.06.2018  |  13405x  |  Product news  | 
Train & more with partner DANOVA ApS Successful use of UWT level measurement technology in various industrial sectors
Train & more with partner DANOVA ApS
Successful use of UWT level measurement technology in various industrial sectors There were three successful and very interesting days with our partner DANOVA ApS from Denmark and his customers, who visited us at the headquarter in Betzigau. During the product training from 14th - 16th May the interested visitors gained a deeper insight into the entire product portfolio of UWT and discussed them with regard to different application preferences. Product highlights were the latest members of the UWT product portfolio: The compact vibrating rod probe Mononivo® 4000 and the smart radar sensor NivoRadar® 3000. Topics such as product specifications and application experience were also focused. Further successfully installed sensors in different material handling processes were discussed and experiences from the various sectors for level measurement, level detection and in the field of silo management software could be exchanged. Many industrial sectors were regarded where UWT level measurement technology was successfully used for several years –
05.06.2018  |  9333x  |  Press release  | 
Aquaculture UK in Aviemore, Scotland Bright Solutions from UWT
Aquaculture UK in Aviemore, Scotland
Bright Solutions from UWT Together with partner Abdie Solutions Ltd. and the team of UWT (UK) Ltd presented at the fair Aquaculture UK at Macdonald Aviemore Resort, in Inverness-shire. The bright solutions concerning content and level measurement technology including the non-contact radar sensor were provided to all interested visitors looking for smart innovations. Aquaculture UK is the most important aquaculture exhibition and conference held in the British Isles. Bright solutions ► continuous & level limit measurement
05.06.2018  |  9147x  |  Press release  | 
ATM Brillant 240 - Semi-automatic Wet Abrasive Cut-off Machi Combines the benefits & speed of a manual cut-off machine with an automatic cutter
ATM Brillant 240 - Semi-automatic Wet Abrasive Cut-off Machi
Combines the benefits & speed of a manual cut-off machine with an automatic cutter The semi-automatic Brillant 240 equipped with an integrated hand lever with electromechanical lever brake. It can be operated with one hand and makes vertical cuts or the positioning of the cut-off wheel easier than before. The stainless steel cutting table can be used in manual mode by a hand wheel (traverse cut), or with a dynamic automatic drive. The latter allows the pulsed cut and the Care-Cut (oscillation cut for chop cuts). For more complex cutting tasks, the Brillant 240 can be equipped with an optional automatic cross table to perform serial cuts. The unique horizontal, parallel moving wheel guard maximizes the usage of the cut-off wheel. A very large color interface and newly created user concept guides the operator through the tasks, to minimize operator errors. The individually adjustable user information system facilitates routine tasks such as renewal of coolant, scheduled maintenance etc. Advantages at a glance: •for cut-off wheel up
05.06.2018  |  3507x  |  Product description  | 
AZO®RoLog  The revolution in automated dosing of micro quantities
AZO®RoLog
The revolution in automated dosing of micro quantities AZO, the specialist in the automation of raw materials logistics for bulk solids and liquids, will be presenting AZO®RoLog. The new system automates the dosing process for micro quantities using a combination of the very latest AZO technology and established robotics. Until now, dosing of micro quantities up to 10 kg has mainly been carried out manually by an operator. Each component in a formulation has to be weighed by hand and fed into the current production process. This can cause problems for the operator and for product safety, especially when it involves metering of extremely critical or harmful materials in pharmaceuticals, chemicals and food production. Materials of this kind can only be handled using special protective measures. There is also the risk that it will be impossible to reproduce complex formulations continuously and accurately. It is for these reasons that AZO has developed the solution: AZO®RoLog. With this system, the raw materials are placed
01.06.2018  |  10641x  |  Press release  | 
AZO cyclone screeners  for screening APIs under containment condition
AZO cyclone screeners
for screening APIs under containment condition Containment has been a core issue for years, particularly in the pharmaceuticals industry. Low occupational exposure limits and complex toxicological evaluations pose special challenges for processors and manufacturers of highly active substances with regard to process safety. On top of this, there are new regulations, such as the modified EU GMP directives, which came into force on 1 March 2015. Thanks to engineering design solutions, today’s plants now generate so little dust in regular operations that it is possible to rule out any threat to the health of plant operating staff from harmful dust. The situation is far more critical when maintenance or cleaning work has to be carried out. Inspection hatches have to be opened in order to inspect working parts in machinery and plants. In the case of maintenance activities, maintenance staff have to remove worn components and install new replacement parts. In the past, this was only possible within isolators when
01.06.2018  |  8970x  |  Press release  | 
MORE POSTS
MAY
2018
APR
2018
MAR
2018
FEB
2018
JAN
2018
DEC
2017
NOV
2017
OCT
2017
SEP
2017
AUG
2017
JUL
2017
JUN
2017
PORTALS
BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising
FOLLOW US
Linked