COMPANY PAGE

The network for & with experts from the filter technology industry At All around filtration you will receive informative and practical presentations on the following topics: * Efficient valve control - pneumatic / electromagnetic design & comparison * Explosion protection of filter systems and avoidance of ATEX zones * Optimised filter control with dynamic cleaning parameters - is that possible? * The variety of industrial needle felt filter media and their application limits * Design of pressure accumulators - What to look out for? 12 June 2024 Excursion & get together in Würzburg Plant tour MHKW Würzburg; Register for the guided tour through the MHKW Würzburg and get insights from the start-up hall to the fabric filter and the turbine hall. Programme: During the approx. 2-hour guided tour by plant manager Klaus Kohnle, you will gain interesting insights. We start with a short introduction and information about the site and the plant in the information centre. We then move on to the start-up hall, the bunker and the crane cabin. Next, we walk through the boiler from top to bottom, including the fabric filter and the turbine hall. During the tour, there will of course also be time for your personal questions. 13 June 2024 Filter technology symposium Discuss with experts from the filter technology and automation industry. You can expect interesting and informative presentations with practical relevance and technically intelligent solutions for all aspects of dedusting technology.

Up to three measuring channels with freely selectable measuring ranges in a single housing: this is what the new multiple differential pressure transducer from HESCH offers. All settings on the HE 5413 are conveniently made using the ”EasyTool Controls 4.0” software from AXXERON HESCH electronics. Typical areas of application for the multiple differential pressure transducer are filter and dust extraction technology, ventilation and building technology, valve and flap controls, clean room and laboratory technology as well as extraction systems and supply air monitoring systems of all kinds. In these applications, the pressure upstream and downstream of filter elements or the extraction pressure against the environment is recorded. In this way, a statement can be made about the degree of contamination of the filter or the performance of the extraction fan can be controlled. The multiple measuring transducer is also ideal for monitoring filter systems with three filter stages, such as fabric filters, police filters and carbon filters. The device can be designed for supply networks with 19...30 V DC or for networks with 100...240 V AC. The

The new pilot valve box HE 5700 makes it possible: With immediate effect, the filter controls from HESCH can also be integrated as standard in dust extraction systems with pneumatic valves. Valve controls from HESCH ensure the optimum triggering of compressed air pulses on industrial dust extraction systems, thus enabling highly efficient filter cleaning. Until now, however, the controls could only be installed on systems with pneumatic valves by using special solutions. The reason was that there was no standardized housing solution for the required pilot valves. Now the HESCH engineers have developed a compact pilot valve box which is suitable for all dust extraction systems with pneumatic valves. This means that the pilot valves and the associated control system can be installed very easily – there is no need for costly special solutions. The pilot valve box fits perfectly into the new generation of modular valve controls from HESCH. It requires significantly less installation space and can be mounted directly near the cleaning valves. This saves users having to lay long compressed air hoses. HESCH is also the only manufacturer on the market