Categories

Hornbach Baumarkt AG is optimising processes within their DIY megastores Heart of the innovative concept: vertical balers from HSM. 330 of the HSM V-Press 860 and HSM V-Press 1160 max balers compact paper, cardboard and film at 180 points of collection – megastores and logistics and administration centres in nine European countries. The investment for the balers is paid off within a very short period. The concept, said Andreas Back, Head of Quality Management, Environment & CSR at Hornbach, has increased the recycling quota dramatically: “A lot of residual waste has become recyclable material.” The objective was a waste management concept that foresaw waste separation and a container registry for more transparency. Additionally, the journeys within the incoming goods areas of the DIY megastores and garden centres were to be optimised so that employees could work more effectively. Disposal of the recyclable material was to become independent of a recycling partner. It quickly became apparent to Andreas Back and his colleagues at the

HSM baling presses reduce the volume of valuable materials by up to 95 % and, with the unmixed bales, produce a secondary raw material, which is reintegrated into the recycling circuit. Positive side effect: The bales have considerable market value when they are above a certain weight. The HSM V-Press models combine the quality requirements of HSM with high profitability. Their performance and longevity make them an economical waste management solution. The HSM V-Press reduces costs at the usually underestimated "waste disposal" cost centre. An absolute defining feature is the HSM V-Press 860 plus B with sliding door and hand-wheel door lock. Thanks to the wide feed opening of 1500 mm, it produces particularly large, highly compressed bales of cardboard or foil which can be marketed without further pressing. With a pressing force of 594 kN and the low-noise and energy-saving rapid traverse technology, it is the economical and environmentally friendly solution for many

A robust and reliable disposal solution With the HSM FP 3000 barrel press, HSM GmbH + Co. KG, the Frickingen manufacturer of baling presses, PET solutions and document shredders, offers a robust and reliable disposal solution for pressing empty, lightweight sheet or roller-type barrels, canisters and plastic containers. The barrel press is easily operated by hand. The material to be pressed is placed in the press and pressed down by the pressing plate with a pressing force of 270 kN and pressed together. The press plate that is mounted in rolls is provided with mandrels and is used for opening and venting the barrel. Any escaping residual liquid is collected in the integrated bottom tray. Optimum operator safety is ensured by the microprocessor control, the membrane keypad with LED display and the closed design with viewing window, which simultaneously prevents dirt from developing. Thanks to the automatic return stroke of the press plate to the starting position once the pressing time has expired, as

Savings of more than 100,000 euros per year and a return on investment of nine months The additives and flavourings manufacturer Van hees gmbH is delighted with its five HSM baling presses, which are helping the company to avoid transport costs as well as optimise internal processes. The company now find themselves earning money from its waste. Five years after the initial introduction of the HSM V-Press 860 S at Van hees, “this machine is still running perfectly,” reports Wohlbold. “It has never really given us any problems.” Furthermore it is put to the test since compressing large bags is no easy task. In any case, the material is expansive and the residues are very aggressive: salts, acetate, flavourings, etc. Wohlbold: “Regular maintenance, a deep clean once a year, and on it goes.” Van hees started with one baling press; it now has five HSM V-Press 860s in service. Three in the blending plant, one in the filling plant and one in goods-in/goods-issue for cardboard. There are also two manually operated mobile HSM V-Press 60 baling presses

HSM HL 7009 MGB – the compact horizontal baling press for industry The compact horizontal baling press HSM HL 7009 MGB, with a pressing power of 700 kN, is the economical waste disposal solution for industry. It has been designed to empty large refuse containers filled with cardboard or plastic films and which have a capacity of over 1 x 1100 litres or 2 x 240 litres. The baling press is filled using the integrated hydraulic lifting/tilting device which enables a marked reduction in the number of people required to compress the material. Thanks to the large loading aperture, even bulky pieces of cardboard are not a problem. With a cross-section of 1100 x 1100 mm and a bale length of about 1200 mm, the bales weigh up to 600 kilogrammes. The hydraulic sliding door ensures convenient operation and safety for the operator when the bales are removed. The bales have 4-fold horizontal strapping and, thanks to their optimized dimensions and weights, achieve an optimum truck loading – this compact, horizontal counter-plate press is perfectly

Yesterday, worthless waste was produced. Today Paul hartmann ag produces marketable bales made of cardboard and polyethylene weighing 400 kilograms. The bales of used cardboard go to the cardboard supplier and thus reduce the costs for new packaging material. ”A perfect recycling material loop”, according to the person responsible at the manufacturer of medical devices. Key players in the success story: a horizontal baling press HSM HL 4812 and a vertical baling press HSM V-Press 860 S. Currently for about three hours a day, an employee is employed in the Homecare Logistics department to press both waste fractions and prepare them for dispatch. HSM advantage: if one machine fails, the other machine can also take over the fraction and compress it. Every six weeks a truck fetches the bales – it can load just under 60 of the 400 kilo packages. The customers for the bales are happy with the new raw material from Heidenheim, reports Michael Kormann: ”Correctly sorted, unsoiled, of constant quality and

HSM GmbH + Co. KG, the South German manufacturer of baling presses, PET solutions and document shredders provides economical solutions for professional waste disposers and industrial applications. The baling presses of the manufacturer from Lake Constance are always specialists when it comes to compressing waste materials by up to 95 % and pressing them into unmixed and optimally transportable bales. With the technical equipment, the operating concept and the design for bulky cartons, the HSM HL 4812 horizontal baling press is the ideal machine for retail and smaller central warehouses. With an extremely high pressing force of 480 kN, the HSM HL 4812 is suitable for cardboard packaging as well as the pressing of film. Depending on the material, the highly compressed bales reach a weight of up to 420 kg, have a bale mass of 1100 x 750 x 1200 mm and are held together by a fully automatic, 4-fold wire strapping. The optimal bale sizes and bale weights guarantee efficient

Channel baling press, document shredders and hard disc shredder Schmitt Recycling in Fulda is based entirely on HSM. The proprietor, Wolfgang Schmitt, values the high performance and reliability of the HSM machines. The modern machine park helps him against major competitors. It is a bit like Asterix: Schmitt Recycling in Fulda is a smaller medium-sized waste disposal business with approximately 35 employees. He is surrounded by two competitors with an international background. The family-run recycling material company must therefore assert itself against strong competition. It achieves this on the one hand with with a strong emphasis on personal contact with the customer and, on the other hand, with an infrastructure, which focuses on performance and efficiency. The proprietor, Wolfgang Schmitt, bases this strategy entirely on HSM. In total, there are now three machines from HSM located on the 15,000 square metre business premises in the Fulda suburb Besges. From the “HSM Powerline HDS 230“ hard disc shredder through the

HSM presents as a competent partner at the IFAT trade fair in Munich From 15 - 18 May, HSM GmbH + Co. KG, the south German manufacturer of baling presses, PET solutions and document shredders, will present its extensive range of products at IFAT, the world’s leading trade fair for water, sewage, waste and raw materials management, in Munich in Hall B5, booth 251/350. The exhibition will include the latest horizontal baling press, HSM HL 7009 with a press force of 700 kN, among other things. The compact horizontal baling press is the economic and space-saving disposal solution for chain stores and retailers, and it easily compresses cardboard and foil. With a cross-section of 1100 x 1100 mm and a bale length of 1200 mm, the bales weight up to 600 kg. In this way, the four-fold horizontally strapped bales achieve optimum truck utilisation. The integrated hydraulic lifting and tilting device means a significant reduction in personnel commitment during the compaction of recyclables. Thanks to the large-sized filler opening, even bulky

Efficient, sustainable and quiet “Today, we have one of the most powerful machines on the market.“ Following a thorough selection process, Hans-Peter Kremer, technical developer at Thommen AG is sure that he made the right choice with the fully-automatic channel baling press HSM VK 12018 R FU. The machine from HSM is unbeatable in terms of robustness, efficiency and reliability. However, while searching for a successor to a 20-year-old pre-press flap press, Thommen AG had some surprises. Convincing reference customers Mr Kremer then made contact with HSM after reading about the company in an article in a recycling trade journal. He was “very impressed“ by a visit to the HSM plant in Salem, Lake Constance and saw how high the share of in-house production is at HSM. “Made in Germany“ is very important to the recycler and, especially, to his boss Dr. Tobias Thommen. Also, after having made several reference visits to HSM customers in south Germany, Mr Kremer returned satisfied to the Thommen

Stationary waste compactor for the recycling industriy Compactor suitable for reclaiming expanded polystyrene packaging. Packaging is reduced to blocks which can easily be placed on pallets for inexpensive transport, storage and recycling. The compactor accepts large materials such as the packaging used by television manufacturers, food containers, etc. Packaging manually fed by the operator is crushed by breakers and then transported by a screw into the compacting chamber. The compacted polystyrene is ejected through a tube at the side. Technical features Average output: EP30 - 30kg/h / EP150 - 150kg/h Feed opening size: EP30 1260 x 380 / EP150 - 1260x380 Ejection opening size: EP30 250x135 / EP150 - 350x215 Average reduction ratio: EP30 28:1 / EP150 - 28:1